Table of Contents
Advertisement
Figure 20. Installing the 3.5-inch secondary storage drive
6. Connect the signal cable and the power cable to the new 3.5-inch storage drive.
7. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 55.
Replacing the 2.5-inch storage drive
1. Remove the storage converter with the 2.5-inch storage drive. See "Replacing the 3.5-inch storage
drive".
2. Replace the 2.5-inch storage drive in the storage converter.
Figure 21. Removing the 2.5-inch storage drive from the storage converter
.
Chapter 4
Replacing hardware
21
Advertisement
Table of Contents
