Download Print this page
Mercia Garden Products 01OBS0406-V1 General Instructions Manual

Mercia Garden Products 01OBS0406-V1 General Instructions Manual

4x6 overlap pent bike store

Advertisement

Quick Links

General Instructions
01OBS0406-V1
4x6 Overlap Pent Bike Store
BEFORE YOU START PLEASE READ INSTRUCTIONS CAREFULLY
- Check the pack and make sure you have all the parts listed.
- When you are ready to start, make sure you have the right tools at hand (not supplied) including a Phillips
screwdriver, Stanley knife, wood saw, step ladder and drill with 2mm bit.
- Ensure there is plenty of space and a clean dry area for assembly.
TIMBER
As with all natural materials, timber can be a ected during various weather conditions. For the duration of
heavy or extended periods of rain, swelling of the wood panels may occur. Warping of the wood may also
occur during excessive dry spells due to an interior moisture loss. Unfortunately, these processes cannot be
avoided but can be helped. It is suggested that the outdoor building is sprayed with water during extended
periods of warm sunshine and sheltered as much as possible during rain or snow.
Once your garden building has been installed it will need to be treated as soon as possible and annually to
prevent the timber from deteriorating and to waterproof it. This is required to maintain the anti-rot guarantee.
Dip Treated buildings - Require a preservative treatment to protect against rot and decay and a waterproof
treatment to prevent water ingress
Pressure Treated buildings - Require a waterproof treatment to prevent water ingress
Log Cabins - Are supplied untreated and require a preservative and waterproo ng treatment.
BUILDING A BASE
When thinking about where the building and base is going to be constructed:
Ensure that there will be access to all sides for maintenance work and annual
treatment.
Ensure the base is level and is built on rm ground, to prevent distortion. Refer to diagrams for the base
dimensions, The base should be slightly smaller than the external measurement of the building, i.e. The
cladding should overlap the base, creating a run o for water. It is also recommended that the oor be at least
25mm above the surrounding ground level to avoid ooding.
TYPES OF BASE
- Concrete 75mm laid on top of 75mm hard-core.
- Slabs laid on 50mm of sharp sand.
Whilst all products manufactured are made to the highest standards of Safety and in the case of childrens
products independently tested to EN71 level, we cannot accept responsibility for your safety whilst
erecting or using this product.
Refer to the instructions pages for you speci c product code
Please retain product label and instructions for future reference
x2
All building's should be
erected by two adults
For ease of assembly, you
MUST pilot drill all screw
holes and ensure all screw
2mm Drill bit
**Protim Aquatan T5 (621)**
Your building has been treated with Aquatan.
Aquatan is a water-based concentrate which is diluted with water, the building as been treated by the correct
application of Aquatan solution and then allowed to dry.
Aquatan is a decorative nish to colour the wood, which is applied industrially to timber fence panels and
garden buildings.
Aquatan undiluted contains: boric acid, sodium hydroxide 32% solution, aqueos mixture of sodium dioctyl
sulphosuccinat and alcohols: 2, 4, 6-trichlorophenol.
For assistance please contact customer care on: 01636 880514
Mercia Garden Products Limited,
Sutton On Trent,
Newark,
Nottinghamshire,
NG23 6QN
www.merciagardenproducts.co.uk
Winter = High Moisture = Expansion
Summer = Low Moisture = Contraction
CAUTION
Every e ort has been made during the
manufacturing process to eliminate the
prospect of splinters on rough surfaces of the
timber. You are strongly advised to wear gloves
when working with or handling rough sawn
timer.
P 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 01OBS0406-V1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Mercia Garden Products 01OBS0406-V1

  • Page 1 - Concrete 75mm laid on top of 75mm hard-core. - Slabs laid on 50mm of sharp sand. Mercia Garden Products Limited, Sutton On Trent, Whilst all products manufactured are made to the highest standards of Safety and in the case of childrens...
  • Page 2 01OBS0406-V1 Please retain product label and instructions for future reference Overall Dimensions: Length = 1952mm Roof Support - 28x28x1133mm QTY 1 Width = 1253mm F2828-1133mm Height = 1230mm Door Frame - 28x28x1085mm QTY 2 Base Dimensions: F2828-1085mm Length = 1900mm...
  • Page 3: Pre-Assembly

    Please retain product label and instructions for future reference Pre Assembly Step 2 Place the back panels and the Before assembling remove the transportation right gable onto the oor and blocks from the bottom of each panel. secure in place using 6x50mm screws.
  • Page 4 Please retain product label and instructions for future reference Step 4 Step 6 Place the rst door frame inbetween Using 2x20mm screws x the the gable and the front panel and “L” bracket to one end of the secure in place using 3x50mm remaing door frame.
  • Page 5 Please retain product label and instructions for future reference Step 8 Step 10 Fix the large trims to the (gable) side Secure 1x eaves frame to each roof and the bottom of the door opening sheet, ush to the edge, using as shown in the illustration, securing 3x30mm screws.
  • Page 6 Please retain product label and instructions for future reference Step 13 Step 12 Cut the felt into 2 sheets and lay Fix the trims to each corner of the building and across the joint at the onto the roof. back, securing each trim into place * Ensure there is approximately with 3x30mm screws 50mm of overhang around the...
  • Page 7 Please retain product label and instructions for future reference Step 15 Attach a turn button to the top and bottom of one door (depending on which door you wish to be the It is ESSENTIAL that you apply wood locking door) using 1x30mm treatment immediately after the building black screw per turn button.