Table of Contents
Advertisement
ideapad 710S-13IKB Hardware Maintenance Manual
1020 Battery pack
For access, remove this FRU:
• "1010 Base cover" on page 34
Figure 2. Removal steps of battery pack
Disconnect the battery connector
Lift up and remove the battery.
When installing: Make sure that the battery connector is attached firmly.
36
DANGER
Only use the battery specified in the parts list for your computer. Any other battery
could ignite or explode.
b
b
Step
Screw (quantity)
M2 × 4 mm, flat-head, nylok-coated (3)
2
Bty to Upper
and remove the screws
1
a
b
Color
Silver
.
2
Torque
1.85 +/- 0.15 kgf-cm
Advertisement
Table of Contents
