Maytag MVWB765FW Cycle Manual

Top Load Washer Cycle Guide
Settings shown are default settings for that cycle. Once you select a cycle, the default modifiers or the previous set modifiers for that
cycle will be lit. For best fabric care, choose the cycle that best fits the load being washed. Not all cycles and options are available on all
models. Not all settings and options are available on each cycle.
NOTE: All rinses are cold.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in
your appliance's Owner's Manual, before operating this appliance.
Items to Wash: Cycle:
PowerWash
Overly soiled
garments, items that
need additional
cleaning effort
Bright or darkly
Colors
colored mixed loads
Large items such as Bedding
sheets, sleeping
bags, small
comforters, jackets,
waterproof items,
small washable rugs
Heavily soiled, Sanitize with
colorfast fabrics Oxi & Steam
or Sanitize
with Oxi
(depending on
model)
Swimsuits and items Drain & Spin/
requiring rinsing Rinse & Spin
without detergent
Cottons, linens, and Normal
mixed-garment
loads
Cold-only garments, Cold Wash
bright or darkly
colored casual and
mixed loads
No-iron fabrics, Wrinkle
Control
permanent press,
synthetics
Machine-wash silks, Delicates
hand-wash fabrics
Temperature: Spin Speed:
®
N/A
Description:
Use this cycle for heavily soiled or sturdy items.
Water-level sensing process may take longer for
some items than for others because they will
absorb more water than other fabric types.
Use this cycle to wash darks and colors, including
mixed loads and activewear.
Use this cycle to wash large items such as
jackets and small comforters. The washer will fill
with enough water to wet down the load before
the wash portion of the cycle begins and uses a
higher water level than other cycles. Use this
cycle after reinstalling your washer; see the
"Reinstalling/Using Washer Again" section of your
Owner's Manual for more information.
Use this cycle to eliminate 99.9% of bacteria
when used in conjunction with the Oxi option.
Preset cycle settings must be used to achieve the
proper sanitization. Be sure to add an Oxi product
to the Oxi dispenser.
Combines high-speed spin with the option of a
rinse-only cycle for loads requiring an additional
spin-out to reduce drying times or an additional
rinse cycle to refresh a load or complete a cycle
after power interruption.
If you wish to run only the Drain & Spin cycle,
select the Drain & Spin cycle.
If you wish to run a Rinse & Spin, select both the
Drain & Spin cycle and the Extra Rinse Option.
Use this cycle for normally soiled cottons and
mixed-fabric loads.
Cold water with an additional wash action gently
lifts stains while caring for fabrics. Settings may
be adjusted as desired, but must use only cold
water settings.
Use this cycle to wash loads of no-iron fabrics
such as sport shirts, blouses, casual business
clothes, permanent press, and blends.
Use this cycle to wash lightly soiled items
indicating "Machine Washable Silks" or "Gentle"
cycle on the care label. Place small items in mesh
garment bags before washing. This cycle uses a
higher, preset water level.
1