Table of Contents
Advertisement
M.2 socket 3
These sockets allow you to install M.2 (NGFF) SSD modules.
•
•
•
•
•
•
•
Intel
H270 Serial ATA 6.0Gb/s connectors (7-pin
®
SATA6G_1~6)
These connectors connect to Serial ATA 6.0 Gb/s hard disk
drives via Serial ATA 6.0 Gb/s signal cables.
System panel connector (20-5 pin F_PANEL)
This connector supports several chassis-mounted
functions.
System power LED (4-pin PWR_LED)
•
This 4-pin connector is for the system power LED.
Connect the chassis power LED cable to this
connector. The system power LED lights up when
you turn on the system power, and blinks when the
system is in sleep mode.
•
Hard disk drive activity LED (2-pin HDD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity
LED cable to this connector. The HDD LED lights up or flashes when data is
read from or written to the HDD.
•
System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker.
The speaker allows you to hear system beeps and warnings.
Chapter 1: Product introduction
The M.2_1 socket supports M Key and 2242/2260/2280 storage devices.
The M.2_2 socket supports M Key and 2242/2260/2280/22110 storage devices.
The M.2_1 socket supports data transfer speed up to 32Gb/s.
The M.2_2 socket supports data transfer speed up to 16Gb/s.
Only M.2_1 can support Intel
supported when using 7th Generation Intel
memory modules, ensure that you have updated your motherboard drivers and
BIOS to the latest version from ASUS support website.
When a device in SATA mode is installed on the M.2_1 socket, SATA_1 port
cannot be used.
When a device in SATA mode is installed on the M.2_2 socket, SATA_6 port
cannot be used.
Optane Memory. Intel
®
®
processors. Before using Intel
®
M.2(SOCKET3)
Optane Technology is only
Optane
®
SATA6G
GND
RSATA_TXP
RSATA_TXN
GND
RSATA_RXN
RSATA_RXP
GND
PANEL
+PWR_LED-
PWR_SW
SPEAKER
PIN 1
+HDD_LED-
RESET
+PWR_LED-
* Requires an ATX power supply
1-4
Hide quick links:
Advertisement
Table of Contents
