Sony XS-AW8 Operating Instructions Manual page 10

Installing the Remote Gain Controller
• Do not install the remote gain controller near the
heater, in areas that get exposed to direct
sunlight, or in areas subject to high temperature.
• Avoid installing the remote gain controller in areas
subject to dust, dirt, or moisture.
• Install the remote gain controller in a location
where:
– There is a flat surface.
– The controller does not interfere with the
driver's movement.
– The controller does not hinder the operations of
the steering wheel, shift level, or the brake
pedal.
Mounting example
Installing using the mounting bracket
1 Secure the mounting bracket  to the
remote gain controller using the securing
screws .
You can secure the mounting bracket 
horizontally or vertically to suit your needs.


10
GB


2
Mount the remote gain controller to your
selected mounting location with the
mounting screws .
Installing using the double-sided tape
1 Apply the double-sided tape  to the base
of the remote gain controller.
Match the curve of the double-sided tape  to
that of the remote gain controller as shown
below.
2
Mount the remote gain controller to a flat
surface.
Clean the surface of your selected mounting
location with a dry cloth before applying the
double-sided tape .

