Edimax ET-912 Specifications

Media Converter

Media Converter
Media Converter
Media Converter
10/100BaseTX To 100Base
10/100BaseTX To 100Base
- FX Media Converter
- FX Media Converter
Best media conversion solutions for network connectivity
Edimax's full series of Media Converter are designed to meet the needs for
massive optical fiber network, provide the whole Ethernet / Fast Ethernet network
implementation.
Migrating between copper and fiber-based Medium
ET-912 series convert the signals between two different transmission medium,
allowing user a simple and cost-effective method to migrate between UTP cable
and fiber optic cable. It can transmit signals up to 2km (multimode) and
30/40/60/80/100km (single-mode) in fiber medium, allowing users to extend
network.
Comply with IEEE Standards
ET-912 series are fully compliant with IEEE 802.3 10Base-T and 802.3u 100Base-
TX, 100Base-FX standards. The device comes with one RJ-45 port to connect to a
10/100Base-TX device such as workstation or switch and one fiber connection to
connect a 100Base-FX device.
Built in Switching ASIC
ET-912 series have turned the function more like a 2 ports switch than a traditional
converter. User can get all switching benefits such as frames checking and
filtering.
Feature LED and Fiber link alarm
User could monitor the device through Feature LED.
could allow user to monitor and maintain their critical fiber link more effectively.
Unique voltage supervisor
Built in voltage supervisor IC will automatically reset all chipsets in converter as
power voltage drop below 2.9V, this action can make sure fiber port and TP port
work normally when thunder storm or power unstable occurring cause the power
electricity suddenly down in an instant time.
Plug-and-Play Installation
Simply to plug the TP and fiber port to the device having the media convertibility.
ET-912 Series
In addition, Fiber Link Alarm