Advertisement
Kit Contents
DESCRIPTION
Discharge Tunnel Assembly
Screw, hex washer head
Screw, self-tapping
Grommet
Knob
Grass Bag Assembly
Installation Instruction Sheet
Assembly
Installing the Discharge Tunnel
1. Stop the engine and disconnect the spark plug wire.
2. Remove the knob and side cover clamp (Fig. 1).
Figure 1
1. Knob
2. Side cover clamp
3. Remove and save the three bolts securing the
discharge cover to the mower (Fig. 2). Save the cover
and bolts for future use.
QTY.
1
4
1
4
1
1
1
1
2
3
m–4275
3. Side opening cover
2
Figure 2
1. Discharge cover
2. Bolt (3)
4. Remove the screw and nut from side of the mower
(Fig. 2). Save them for future use.
5. Install four grommets supplied with the grass catcher
into the four square holes in the mower (Fig. 3).
1
Figure 3
1. Grommet (4)
6. Insert the tongue of the discharge tunnel into the
mower (Fig. 4).
7. Align the holes in the tunnel with the grommets in the
mower (Fig. 4).
8. Ensure that the hole in the tongue aligns with the hole
in the side of the mower (Fig. 4).
2
3
1
m–4275
3. Screw and nut
2009
Advertisement
