Table of Contents
Advertisement
(2) Press the
icon from the [PF position adjustment] screen.
(3) Replace the presser foot with standard one.
(4) Press the
set the gap between bottom of presser foot and top of needle plate to be 0 to 0.2 mm. The screen
indicates ZNPP default value (Upper) and current value (Lower).
NOTE The ZNPP value can be set every 0.1 mm.
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com
15.0
15.0
15.0
icon and down the presser foot to the top of the needle plate. In this time,
30.0
28.0
- 33 -
Advertisement
Table of Contents
