Setting The Bobbin; Setting The Bobbin Case - Mitsubishi Electric PLK-J10050 Technical Manual

5-5. Setting the bobbin

(1) Set the bobbin (No.2) into the bobbin case (No.1).
(2) Pull the bobbin thread (No.3) into the slit (No.4) and pass through the thread hole (No.5).
At this time, pull the bobbin thread (No.3) then, check with the bobbin (No.2) if it is rotated to the arrow
direction. If it is not, set the bobbin (No.2) into the bobbin case (No.1) over again to get the proper
rotation.
<5>

5-6. Setting the bobbin case

(1) Pull the bobbin thread about 25mm out of the thread hole of the bobbin case (No.1).
(2) Open the bobbin access door.
(3) Open the bobbin case latch (No.2) and hold it then, fit it securely in the shuttle hook (No.3).
<1>: Bobbin case <2>: Bobbin case latch <3>: Shuttle hook
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com
<4>
<2>
ｂ
<1>
<3>
<3>
<1>
- 12 -
<1>: Bobbin case
<2>: Bobbin
<3>: Thread
<4>: Bobbin case slit
<5>: Bobbin case thread hole
25mm
<1>
<2>