Configuration File - Edimax BR-6641 User Manual

Log on to Web UI as the Administrator and go to function [System]→ [Administration].
Use [Browse...] to select the path to the new firmware image, then select [Upload].
The firmware update will take a while so be patient. During the update process BE
SURE not to turn off the system or pull the power plug. You should also NOT click
on [Upload] button.
Note:Update will succeed when ¬the "Update succeeded" message appears. At this time
please power off and then on again the system to restart BR-6641 with the new
firmware.

Configuration File:

Push Save button to save current configuration into a file. Push Restore button to
restore the configuration back from a saved configuration file. See Appendix 2 for
more information.
Log into BR-6641 as Administrator. In the Web UI, go to [System]→
[Administration] and select [Configuration File] → [Save] to backup the Config File
to your local machine/notebook.
To restore to the previously saved config file, go to [Configuration File] → [Restore],
select [Browse...] to pick the saved config file and select [Upload]. Notice: DO NOT
to turn off the power during the config file upload process, or repetitively select the
[Upload] button.
Restart BR-6641 to effect the configuration.
Maintenance:
Push Factory Default button to reset BR-6641 configuration to its factory default. You
can do the same operation using resetconfig command in console. Push reboot
button to reboot BR-6641.
24
BR-6641 User Manual