Administrator Password; Firmware Update - Edimax BR-6641 User Manual

You can reset BR-6641 to its factory default state. In doing this, you will lose your
entire customized configuration.
Finally, you can reboot BR-6641. Due to web interface limitations. There will not be
any messages after you have rebooted the system. Wait two minutes or so and try
to re-connect to BR-6641 using the browser.

Administrator Password:

Here, you can add, delete, or modify administrator's account and password.
Field
New Password
Confirm
Set Password
Monitor Password:
Here, you can add, delete, or modify Monitor's account and password.
Field
Password
Confirm
Set Password

Firmware Update:

Push the Update button and follow the following instruction to start the firmware
update process.
Obtain the latest firmware pack from your SI or VAR
Value
Enter the new password here.
Enter the new password here again.
Click the button to enable the new
password.
Value
Enter the new password here.
Enter the new password here again.
Click the button to enable the new
password.
23
BR-6641 User Manual
Description
Descreption