Toshiba PORTEGE X30-E User Manual page 82

To access the utility, click Start -> DTS, Inc -> DTS Studio Sound.
U.S. patents apply to this product. See http://patents.dts.com.
Manufactured under license from DTS Licensing Limited.
Realtek HD Audio Manager
You can confirm and change the audio configuration using the Realtek HD
Audio Manager. To launch the Realtek HD Audio Manager:
When you first launch the Realtek HD Audio Manager, you can see two
device tabs. Speakers is the default output device. Microphone Array is
the default input device. To change the default device, click the Set
Default Device button under the chosen device tab.
Information
Click the Information button
information, and language setting.
Power Management
The audio controller in your computer can be turned off when the audio
function is not used. To adjust the configuration of audio power
management, click the Power Management button
Speaker Configuration
Click the Auto Test button
headphone sound is coming from the right direction.
Default Format
You can change the sample rate and bit depth of sound.
Headphone/Microphone selection
To change the type of headphone or microphone, do the following:
1.
User's Manual
Dialog enhancement for clear and intelligible vocals
Bass enhancement for rich, low frequency production
High frequency definition for crisp details
Consistent volume level across content
Click Start -> Windows System -> Control Panel -> Hardware and
Sound -> Realtek HD Audio Manager.
When audio power management is enabled, the circle button at the
upper left of the Power Management is blue and convex.
When audio power management is disabled, the button is black and
concave.
Plug a headphone or microphone into the headphone/microphone
combo jack.
to view hardware information, software
to confirm the internal speakers or the
.
4-30