Table of Contents
Advertisement
Although the SAR is determined at the highest certified power level, the
actual SAR level of the mobile phone while operating can be well below
the maximum value. This is because the mobile phone is designed to
operate at multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a wireless base
station antenna, the lower the power output of the mobile phone.
Before a mobile phone model is available for sale to the public,
compliance with national regulations and standards must be shown.
The highest SAR value for this model mobile phone when tested is
0.62 W/kg for use at the ear and 1.15 W/kg for use close to the body.
While there may be differences between the SAR levels of
various cellphones and at various positions, they all meet the
government requirement for RF exposure. For body-worn
operation, the cellphone meets FCC RF exposure guidelines
provided that it is used with a non-metallic accessory with the
handset at least 15 mm from the body. Use of other accessories
may not ensure compliance with FCC RF exposure guidelines.
Additional information on SAR can be found on the Cellular
Telecommunications & Internet Association (CTIA) Web site:
http://www.phonefacts.net
The World Health Organization (WHO) considers that present
scientific information does not indicate the need for any special
precautions for use of mobile phones. If individuals are concerned,
they might choose to limit their own or their children's RF
exposure by limiting the length of calls, or using "hands-free"
devices to keep mobile phones away from the head and body. (fact
sheet n°193). Additional WHO information about electromagnetic
fields and public health are available on the following website:
http://www.who.int/peh-emf.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there
is no guarantee that interference to radio or television reception,
which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
38
- Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
For the receiver devices associated with the operation of a licensed
radio service (e.g. FM broadcast), they bear the following statement:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the condition that this device does not cause harmful
interference.
For other devices, they bear the following statement:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference.
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Your mobile phone is equipped with a built-in antenna. For optimal
operation, you should avoid touching it or degrading it.
As mobile devices offer a range of functions, they can be used in
positions other than against your ear. In such circumstances the
device will be compliant with the guidelines when used with headset
or usb data cable. If you are using another accessory ensure that
whatever product is used is free of any metal and that it positions the
mobile phone at least 10 mm away from the body.
•
LICENSES
microSD Logo is a trademark.
The Bluetooth
the Bluetooth SIG, Inc. and any use of such marks by
TCL Communication Ltd. and its affiliates is under
license. Other trademarks and trade names are
those of their respective owners.
ALCATEL POP 4 PLUS 5056N
Bluetooth Declaration ID
D026715
The Wi-Fi CERTIFIED Logo is a certification mark
of the Wi-Fi Alliance.
Google, the Google logo, Android, the Android logo,
Google Search
Android Market, Google Latitude
are trademarks of Google Inc.
TM
word mark and logos are owned by
®
, Google Maps
, Gmail
, YouTube,
TM
TM
TM
TM
and Hangouts
39
Advertisement
Table of Contents
