Advertisement
Installing the Stand or Wall Mount Bracket
Installing the Stand
CAUTION
Be sure to disconnect the A/C power cord before removing a base stand or
installing Wall-Mount brackets.
The screen display is very fragile, and must be protected at all times when installing
the base stand. Be sure that no hard or sharp object, or anything that could scratch
or damage the screen display, comes into contact with it. DO NOT exert pressure
on the front of the TV at any time because the screen could crack.
Follow the illustrations and textual instructions below to complete the installation steps:
1. Carefully place your TV face-down on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
2. Open Base Cover A by using the bulge on it and take it away. Base Cover A is on
the back cover and at the place that used to fix the base.
3. Using the 5 screws in the accessory bag, secure the Column Base to the Base
Stand tightly.
Base Cover A
2
Cover Plate
Column Base
Base Stand
Screws: M5×16
Advertisement
