Table of Contents
Advertisement
7) User's Setting
User 's Setting
1. Edit/Add SAT or TP
2. Edit LNB Local Freq.
3. Edit CH Name & PID
4. Reset(Factory Default)
To add a new satellite name, press OK after moving to
[ ???????? ] mode for satellite.
After entering new satellite name, you can set each
parameters by giving the data for Transponder Freq.,
LNB Polarization, Symbol Rate and FEC.
To edit an additional transponder on a pre-programmed s
atellite, you should input all the required data after movin
g to the satellite you want to edit.
Note 1) You should execute "Auto Search" after editing the Satellite or the transponder.
If Auto Search is executed after adding the new transponder, all channels of the added
transponder will be searched and stored automatically.
CAUTION) By doing an Auto Search you will lose all the data (ex. FAV, Lock...)
which you have edited.
Note 2) You can add or edit a total 50 satellites. This includes the pre-programmed satellites.
The receiver has the capability to store up to 999 transponders and 2,900 channels.
Edit/Add SAT or TP
Edit/Add Satellite or Transponder
Satellite
Index
Transponder Freq.
LNB polarization
Symbol Rate
FEC
* Change = ? , ?
* Move = ? , ?
* Name Editing = OK key
You can edit a pre-programmed satellite name and add
a new one in this menu.
Also you can edit and add Transponder Frequency para
meter by using numeric keys.
Edit/Add Satellite or Transponder
Satellite
Index
Transponder Freq.
LNB polarization
Symbol Rate
FEC
* Change Character = ? , ?
* Move forward = ?
* Save = OK key
Name Editing
13
?
ASTRA 1 ?
7
0
Horizontal
0
AUTO
?
?????? ?
7
0
Horizontal
0
AUTO
* Move backward = ?
* Cancel = MENU
? ? ? ? ? ? ? ?
Advertisement
Table of Contents
