Location Requirements - Haier ESA405R User & Care Manual

LOCATION REQUIREMENTS

IMPORTANT:
O s b r e
conditioner will be installed. Make sure you have everything necessary for correct
installation.
THE LOCATION SHOULD PROVIDE:
• A grounded electrical outlet within 6 ft. (183 cm) of where the power supply cord exits the air
conditioner, for models: ESA405R, ESA406R, ESA408R , ESA410R, ESA412R
NOTE: o
D not use an extension cord, plug adapter, surge protector or multi-outlet adapter.
• Free movement of air in the room to be cooled.
• A large enough window opening for the air conditioner. (See Fig.2)
• Theair conditioner must not be installed in a through-the-wall sleeve or in a wall. It can only be
installed in a double-hung window.
NOTE: The outside cabinet louvers and air discharge must not be obstructed by bushes, trees,
etc. Air must be able to pass freely through the cabinet louvers. (See Fig.1)
Fig. 1
CABINET LOUVERS
WINDOW INSTALLATION
Window opening measurements:
A. Width
24-1/2" - 36"
B. Height
PAGE 6
e v all governing codes and ordinances. Check the location where the air
WIDTH
ESA405R
ESA408R
ESA406R
25" - 36-5/8"
13-3/8" 14-9/16"
INSTALLATION REQUIREMENTS
Fig. 2
AIR DISCHARGE
WIDTH
ESA410R
ESA412R
26-1/8" - 37-3/4"
15-1/8"
B-HEIGHT
A-WIDTH