Use Your Earpieces; Connect The Earpieces To Your Bluetooth Device; Control Anc (Active Noise Cancellation) - Philips 8000 Series User Manual

4 Use your
earpieces
Connect the earpieces to
your Bluetooth device
1
Turn on the Bluetooth function of
your Bluetooth device.
2
Open the charging box cover.
The blue LED ashes.
The earpieces will search the last
connected Bluetooth device and
reconnect to it automatically. If
the last connected one is not
available, the earpieces will
search and reconnect to the
second last connected device.
Tip
 If you turn on the Bluetooth function of your
Bluetooth device after turning on the earpieces,
you have to go to the Bluetooth menu of the
device and connect the earpieces to the device
manually.
Note
 If the earpieces fail to connect to any Bluetooth
device within 3 minutes, it will turn
o automatically to save the battery life.
 In some Bluetooth devices, connection may not
be automatic. In this case, you have to go to the
Bluetooth menu of your device and connect the
earpieces to the Bluetooth device manually.
 If no signal (music/call) is received for 60 mins
even with Bluetooth connection, the earpieces
will turn o automatically to save the battery
life.
8 EN
Control ANC (Active Noise
Cancellation)
Enable ANC
Di erent ANC modes can be toggled via
double tapping on the right earpiece.
• ANC function is automatically
activated when earpiece is placed in
the ear
• Touch the MFT twice, it will change
to awareness mode
• Touch the MFT twice again, it will
turn the ANC function o
ANC O
Tip
 Removing the earpieces will automatically
activate sleep mode. When you put the
earpieces back they will return to active mode.
Task MFT
ANC ON Right
earpiece
Awareness Right
mode earpiece
ANC OFF Right
earpiece
Quick Right
awareness earpiece
Awareness
mode
ANC ON
Operation
Double tap
Double tap
Double tap
Continue
touching
after beep