Advertisement
Assembly Steps
The two side panels are different, please
distinguish them by the mark on each panel,
and the marked side should be outward.
1. Optional step, if you need to install
SSDs, please mount the SSDs to the two
side panels with M3 screws, this step can
also be finished after panels assembled.
1. M3 screws can only install SSD
2. M5 screws can only install fans
3. Others are M2.5 screws
2. Mount the cooling fans to the back
panel and fix them with M5 screws.
3. Assemble the back panel, front panel
and side panels with M2.5 screws.
5. Assemble the finished frame with the
bottom panel, fix them with M2.5 screws.
And mount the four footpads to the
bottom, tear off the sticker and paste it
directly.
CONTACT US
If any problem, feel free to contact us.
Website: www.uctronics.com
Email: support@uctronics.com
4. Put the top panel to cover the top
and fix it with M2.5 screws.
Please let the I/O ports downwards if
they need to be plugged in.
6. Install the Raspberry Pi on the
mounting bracket with four M2.5
screws, then plug in the enclosure, and
fix it with two M2.5 screws.
Advertisement
