HC151+CST / HC151+PImA / HC200+CST ENGLISH INDEX GENERAL RULES ............................. 4 SHIPPING AND TRANSPORTING THE PUMP ................. 4 INSTALLATION STANDARDS ......................4 PROPER USE OF THE PUMP ......................4 OPERATION .............................. 6 OVERALL DIMENSIONS ........................6 TECHNICAL FEATURES ........................6 HYDRAULIC FEATURES ........................
The servicing and maintenance of the dosing pump and all its accessories must always be carried out by qualified personnel. AQUA SpA cannot be held responsible for damage to persons or things caused by poor installation or incorrect use of the dosing pump.
Page 5
HC151+CST / HC151+PImA / HC200+CST ENGLISH Avoid inverting the pump delivery and suction; Avoid powering the pump with voltages other than those indicated in the technical specifications; Avoid connecting any equipment other than specific equipment to the signal outputs (level, pulse...
HC151+CST / HC151+PImA / HC200+CST ENGLISH 2. OPERATION The HC151+ CST HC200+ CST and HC151+ PImA analogue pumps are solenoid driven dosing pumps that can operate at constant flow (CST version) or at proportional flow according to an external signal (PI-mA version).
HC151+CST / HC151+PImA / HC200+CST ENGLISH HYDRAULIC FEATURES Hydraulic characteristics of the 230V version INJECTION ABSORBED FLOW RATE PRESSURE STROKES VALUE POWER SOLENOID TYPE ml/stroke Watt 0,17 0,83 0,33 0,51 0,93 0,40 0,89 0,56 0,97 0,54 1,30 0,44 1,11 0,54...
HC151+CST / HC151+PImA / HC200+CST ENGLISH 2.4.2 graphs relating to the 110V versions CONTENT OF THE PACKAGE ▪ HC151 pump ▪ User’s manual ▪ Injection valve PP-GL-VT (PVDF-CE-VT only for PI-mA model) ▪ Foot filter PP-GL-VT (PVDF-CE-VT only for PI-mA model) ▪...
HC151+CST / HC151+PImA / HC200+CST ENGLISH To change the scale frequency from 100% to 20% press SET (3) button; ATTENTION: the selection of the frequency scale can be performed only when the pump is in stand-by mode. NOTE: after a power failure the pump will return to the state prior to the power failure (Eg: if the pump was operating at the time of the power failure, on its return, the pump will continue working).
HC151+CST / HC151+PImA / HC200+CST ENGLISH HC151 PImA OPERATING MODE The pump can operate in one of the following modes, which can be selected by pressing the SET button: When it turns on for the first time the pump is set, by...
HC151+CST / HC151+PImA / HC200+CST ENGLISH HOW TO CHOOSE THE PERFORMANCES OF A PUMP Being known the value of m (cubic meters) of water of the plant to be treated and the quantity of chemical to be dosed, expressed in ppm (gr / m...
HC151+CST / HC151+PImA / HC200+CST ENGLISH 5. DOSING PUMPS INSTALLATION RULES Strictly follow the instructions for a correct installation of the dosing pump to avoid malfunctions. The most frequent cases are described below: • Locate the pump as shown in Figure 1, bearing in mind that it can be mounted either below or above the level of the chemical to be dosed within the maximum limit of 2 meters (we suggest 1.5 meters).
HC151+CST / HC151+PImA / HC200+CST ENGLISH 6. ELECTRICAL CONNECTIONS HC151+ PImA model pump The connector on the bottom of the pump allows the connection of an external signal coming from a pulse emitting water meter or a mA signal. Obviously, if a pulse emitting water meter is connected, a mA signal cannot be connected and vice versa.
HC151+CST / HC151+PImA / HC200+CST ENGLISH Jumper mounted (standard): version 230V Jumper removed: version 110V 7. TROUBLESHOOTING The solenoid driven dosing pump is a relatively robust device, therefore the chances of mechanical failures are low. Sometimes chemical leaks may occur from nipples or loose hose nuts of the pump head or simply due to breakage of the discharge pipe.
BEFORE packing it in its original box! 9. WARRANTY The product is covered by the manufacturer's warranty for manufacturing defects. The methods and conditions are set forth in the "General Conditions of Sale" document of AQUA SpA.
Page 21
HC151+ PIMA POLICARBONATE ADHESIVE LABEL COVER NERO CORPO POMPA 1-14LT HC897 ADSP9000022 1-14LT PUMP HEAD BLACK COVER TARGHETTA NERA CON LOGO AQUA PER CORPO POMPA 1-14LT ADSP9000003 1-14LT PUMP HEAD BLACK PLATE WITH LOGO AQUA COPERCHIO POSTERIORE HC151 DGT PP NERO CON GUARNIZ.
Page 23
HC200+ REAR CASING BLACK COLOR COVER NERO CORPO POMPA 1-14LT HC897 ADSP9000022 1-14LT PUMP HEAD BLACK COVER TARGHETTA NERA CON LOGO AQUA PER CORPO POMPA 1-14LT ADSP9000003 1-14LT PUMP HEAD BLACK PLATE WITH LOGO AQUA PERNO REGOLAZIONE CORSA LAVORATO ADSP6000759 STROKE LENGTH SHAFT MAGNETE COMPLETO D60 VERS.2 230V SILENZIOSO...
Need help?
Do you have a question about the HC151+CST and is the answer not in the manual?
Questions and answers