Ortech OIF6-260 Manual

MODEL
OIF4-140 | OIF5-190 | OIF6-260 | OIF8-560 | OIF10-670 | OIF12-880
WARNING
WARNING — TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
1. Use this unit only in the manner intended by the manufacturer. If you
have questions, contact the manufacturer.
2. Before servicing or cleaning unit, switch power off at service panel and
lock the service disconnecting means to prevent power from being
switching on accidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent warning device, such as a
tag, to the service panel.
3. Installation work and electrical wiring must be done by a qualified
person in accordance with all applicable codes and standards, including
fire-rated construction codes and standards.
4. Sufficient air is needed for proper combustion and exhausting of gases
through the flue (chimney) of fuel burning equipment to prevent
backdrafting. Follow the heating equipment manufacturer's guideline
and safety standards such as those published by the National Fire
Protection Association (NFPA), and the American Society for Heating,
Refrigeration and Air Conditioning Engineers (ASHRAE), and the local
code authorities.
5. When cutting or drilling into wall or ceiling, do not damage electrical
wiring and other hidden utilities.
6. Ducted fans must always be vented to the outdoors.
7. Acceptable for use over a tub or shower when connected to GFCI
(Ground Fault Circuit Interrupter) — protected branch circuit
(ceiling installation only).
CAUTION
1. For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
2. This duct fan shall be installed a minimum of one meter from any accessible opening of the duct.
DO NOT MOUNT THIS PRODUCT IN A WALL.
3. This unit has an ungrounded impeller. Do not use in locations readily accessible to people or animals.
info@ortechindustries.com
www.ortechindustries.com
Inline Fans
13376 Comber Way
Surrey BC V3W 5V9
1-888-543-6473
1-888-541-6474