Haier SUPER MATCH AS12NS1HRA-GOLDEN Service Manual page 31

Operation
1
Press TEMP button.
AM
QUIET
.
Unit will start running to reach the
temp. setting on LCD.
FAN
ECO
SPEED
2
FAN Operation
Press FAN SPEED button. For each press, fan speed
changes as follows:
LOW MED HI
Unit will run at selected fan speed.
The temperature can be increased or decreased by
0.5 ºC while operating the remote control, but the
display board of the air conditioning unit only displays
integral degrees. For example, when the remote
control displays a temperature of 24.5 ºC, the display
board of the air conditioning unit will only show 24 ºC.
Every time the button is
pressed, temp. setting
increases 0.5 ºC.
Every time the button is
pressed, temp. setting
decreases 0.5 ºC.
.
AUTO
1
For each press of "
displays as follows according to
AM
different operation modes:
QUIET
COOL/DRY:
.
HEAT:
SMART:
FAN
ECO
SPEED
Initial state
2
For each press of "
displays as follows:
remote controller:
Initial state
When humidity is high, condensate water might occur
at air outlet if all vertical louvers are adjusted to left or
right.
position for a long time in COOL or DRY mode,
otherwise, condensate water might occur.
better air circulation.
29
System configuration
" button, air
" buttor, remote controller
Domestic air conditioner