Table of Contents
Advertisement
Available languages
Available languages
1. Turn the heater on by pressing the ON/OFF button on the rear of heater.
Pressing button on the control panel or by pressing the Power button on the supplied remote control.
Once power is off, heating element will stop working
2.
Power for heat-HIGH mode is 1500W; heat-LOW is 750W,and turn off the heat.
3.
Adjust the brightness of the flame and turn off
4. Pressing buttom for timing ( 0.5h~8.0h)
MAINTENANCE
1.
Turn off the power switch in the rear of the unit.
2.
Unplug the unit and let it cool completely.
3.
To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After
cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater.
4.
DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or
deterioration to the surface of the heater.
5.
DO NOT immerse the heater in water.
Wait until the unit is completely dry before use.
6.
Air filter needs cleaning after used 3 months of use. Please take off the filter with the 2 steps in the drawing below. Flush
7.
and clean the filter with water, Then, dry it out and re-assemble.
Disposal
Environmental Protection
Waste electrical production should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
5
Advertisement
Table of Contents
Need help?
Do you have a question about the 820-125V80 and is the answer not in the manual?
Questions and answers