Table of Contents
Advertisement
2. Hardware Installation/Uninstallation
Refer to the User's Guide of the server for installation and removal of this product to the server.
IMPORTANT: -
Be sure to refer to the user's guide of the server to install and uninstall this product.
Unplug all power cords
Turn the power off and unplug the power before removing the computer's cover. Failure
to do so could endanger you and may damage the adapter or computer
Avoid installation in extreme temperature conditions.
Immediately after the server is powered off, its internal components such as heat sink are very hot.
Leave the server until its internal components fully cool down before installing/removing any
component.
Ground yourself to dissipate any static charge before handling the adapter.
To prevent any damage on components due to static electricity, make sure to discharge
static electricity from yourself before you touch N8105 adapter.
Don't touch uncoated metal parts on adapter.
Never touch terminals of components or uncoated metal parts on adapter. Otherwise,
taint, erosion or others may cause loose connection. Do not touch this product with wet
or dirty hands.
Excessive force could break the connector.
On installing this adapter, do not insert it by force. Otherwise, N8105 adapter and the
server may be damaged.
Don't touch the tip of bracket to other parts of server
When you insert N8105 adapter into expansion slot, be careful not to touch the tip of
bracket to other parts of server (such as other components or board). Otherwise, they
may be damaged.
Firmly connect the cable
When connecting the cable, insert the cable connector firmly.
E-11
Advertisement
Table of Contents
