Table of Contents
Advertisement
provide cavity for rear support. In these applications, place the rubber bushing over the
screw stud and insert.
CAUTION: The perforated rear support strap or rear rubber mounting bushing must
be used in the installation of the radio. Installation without either may result in
damage to the radio or the mounting surface and void the manufacturer's warranty.
9.
Test radio operation by referring to the operating instructions for the unit.
Removing the Unit
To remove the radio after installation,
remove the plastic end caps, insert the
removal keys straight back until they
click, and then pull the radio out. If
removal keys are inserted at an angle,
they will not lock properly to release
the unit.
Reconnect Battery
When wiring is complete, reconnect
the battery negative terminal.
4
JCV2015BT
Advertisement
Table of Contents
