Advertisement
Quick Links
Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and rubber mallet.
ST-E
DR-E
Parts :
ST-A: Back Panel
(30.25" x 28" x 1")
Quantity: 1
ST-E: Left Side
ST-F: Right Side
(15" x 31" x 1")
(15" x 31" x 1")
Quantity: 1
Quantity: 1
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
Tower w/ Doors • INSTRUCTIONS
CARTONS: ST3330, STD3033
800-558-1010
ST-G
www.NBF.com
ST-D
ST-B: Shelves
(28" x 13" x 1")
Quantity: 2
ST-G: Top
(29.5" x 15" x 1")
Quantity: 1
ST-H: Base
(28" x 14.25" x 1")
Quantity: 1
Any problems or questions call Regency Office Furniture at 1-866-816-9822
ST-F
DR-F
ST-C
ST-H
ST-C: Center Support
Quantity: 1
Figure 1:
Cam Lock Assembly:
To open Cam, point arrow
toward Cam Pin hole. To lock
Cam, turn clockwise.
ST-D: Foot Bracket
(15"D)
Quantity: 2
DR-E: Left Door
DR-F: Right Door
(14" x 30" x 1")
(14" x 30" x 1")
Quantity: 1
Quantity: 1
Tower w/ Doors
Page 1
Advertisement
Related Manuals for nbf Signature Series
Summary of Contents for nbf Signature Series
- Page 1 Tower w/ Doors Page 1 Tower w/ Doors • INSTRUCTIONS CARTONS: ST3330, STD3033 800-558-1010 Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and rubber mallet. ST-G www.NBF.com ST-F ST-E DR-E DR-F Figure 1: Cam Lock Assembly: To open Cam, point arrow toward Cam Pin hole.
- Page 2 Page 2 Tower w/ Doors • INSTRUCTIONS CARTONS: ST3330, STD3033 Hardware : 800-558-1010 J: 2.35” Long Bolt K: 1.5” Medium Bolts I: Allen Key www.NBF.com (60mm) (38mm) Quantity: 1 Quantity: 4 Quantity: 1 N: 3/4” Wood Screws M: Shelf Pins L: 3/4”...
- Page 3 CARTONS: ST3330, STD3033 800-558-1010 STEP 3 : Attach the Left Side(ST-E) and Right Side(ST-F) to the STEP 4 : Insert 5 Wood Cam Pins(O) into Top(ST-G). www.NBF.com back and Base(ST-H) by inserting and locking cams (Figure 1). ST-F ST-G ST-E...
- Page 4 STEP 9 : Use 2 Wood Screws(N) to attach each Hinge STEP 10: Attach the Lock Latch(Y) with 2 Latch Screws(X) www.NBF.com Bracket(U) to the sides. The hinge adjustment screw on each and Door Stop(Z) with 1 Wood Screws(P) to the Top(ST-G).
- Page 5 CARTONS: ST3330, STD3033 800-558-1010 If you are attaching Tower w/ Doors to Low Credenza, Continue with Optional Step. www.NBF.com OPTIONAL STEP FOR EXTRA STABILITY ON A 60”x20” LOW CREDENZA OPTIONAL STEP A : Remove the Glide(Q) from the Center Support(ST-C).