Page 1
Tower w/ Doors Page 1 Tower w/ Doors • INSTRUCTIONS CARTONS: ST3330, STD3033 800-558-1010 Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and rubber mallet. ST-G www.NBF.com ST-F ST-E DR-E DR-F Figure 1: Cam Lock Assembly: To open Cam, point arrow toward Cam Pin hole.
Page 3
CARTONS: ST3330, STD3033 800-558-1010 STEP 3 : Attach the Left Side(ST-E) and Right Side(ST-F) to the STEP 4 : Insert 5 Wood Cam Pins(O) into Top(ST-G). www.NBF.com back and Base(ST-H) by inserting and locking cams (Figure 1). ST-F ST-G ST-E...
Page 4
STEP 9 : Use 2 Wood Screws(N) to attach each Hinge STEP 10: Attach the Lock Latch(Y) with 2 Latch Screws(X) www.NBF.com Bracket(U) to the sides. The hinge adjustment screw on each and Door Stop(Z) with 1 Wood Screws(P) to the Top(ST-G).
Page 5
CARTONS: ST3330, STD3033 800-558-1010 If you are attaching Tower w/ Doors to Low Credenza, Continue with Optional Step. www.NBF.com OPTIONAL STEP FOR EXTRA STABILITY ON A 60”x20” LOW CREDENZA OPTIONAL STEP A : Remove the Glide(Q) from the Center Support(ST-C).