Maintenance And Servicing; Cleaning And Maintenance - Harbor Freight Tools 67378 Owner's Manual & Safety Instructions

MaintEnancE anD SErVicinG

procedures not specifically explained
in this manual must be performed
only by a qualified technician.
inspection, maintenance, or cleaning procedures.
Do not use damaged equipment. Have the problem corrected before further use.

cLEaninG anD MaintEnancE

1. BEFOrE EacH USE, inspect the general condition
of the tool. Check for loose hardware, misalignment
or binding of parts, cracked or broken parts,
damaged electrical wiring, and any other condition
that may affect its safe operation.
Item 67378
tO prEVEnt SEriOUS inJUry FrOM acciDEntaL OpEratiOn: turn the power
Switch of the tool off and remove the batteries from the tool before performing any
For technical questions, please call 1-888-866-5797.
2. Handle the Metal Detector gently and carefully.
Dropping it can damage circuit boards and the
case, and can cause the Detector to malfunction.
3. aFtEr USE, wipe external surfaces of the
tool with a damp clean cloth, then dry. Do not
use harsh chemicals, cleaning solvents, or
strong detergents to clean the detector.
Page 9