1. Manuals
  2. Brands
  3. Harbor Freight Tools Manuals
  4. Metal Detector
  5. 67378
  6. Owner's manual & safety instructions

Harbor Freight Tools 67378 Owner's Manual & Safety Instructions

Metal detector with arm rest
Hide thumbs Also See for 67378:

Advertisement

Table of Contents

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Metal
Detector
with Arm Rest
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23g
67378

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 67378 and is the answer not in the manual?

Questions and answers

Related Manuals for Harbor Freight Tools 67378

Summary of Contents for Harbor Freight Tools 67378

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.

  • Page 2: General Power Tool Safety Warnings

    (carbon-zinc), or information. If unreadable or missing, contact rechargeable (nickel-cadmium) batteries. Harbor Freight Tools for a replacement. Position batteries in proper polarity. Do not use swollen or leaking batteries. 2. Handle Tool carefully at all times. Dropping Tool can cause damage to circuit boards and housing, 4.
  • Page 3 6 AA Batteries (not included) Headphone Socket 3.5 mm mini-jack Socket Sensitivity Adjuster; Metal-Type Discriminator; All-Metal Indicator; Tone Adjuster; Volume Functions Control; Target Locator; Low Battery Indicator; Auto Ground Balance; Mode Selector Item 67378 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page . components arm Support Headphone Socket Handle control Box View Meter Upper Leg Lower Leg Search coil Page 4 For technical questions, please call 1-888-866-5797. Item 67378...

  • Page 5: Tool Set Up

    Socket on the Control Box. the Headphones, then adjust the level up to a comfortable listening level. extended high volume listening can lead to permanent hearing loss. Item 67378 For technical questions, please call 1-888-866-5797. Page 5...

  • Page 6: Control Panel

    2. Set SENS Knob to midpoint. Set is similar to silver. So both metals will be MODE Switch to DISC. detected at the same time. The discrimination position of gold is similar to the nickel setting. Page 6 For technical questions, please call 1-888-866-5797. Item 67378...
  • Page 7 1″ to 3″ from the ground. Tilting or raising store the tool indoors out of children’s reach. the Search Coil during the sweep will produce false readings. If needed, adjust the SENS Knob. Item 67378 For technical questions, please call 1-888-866-5797. Page 7...

  • Page 8: Cleaning And Maintenance

    • cracked or broken parts, and strong detergents to clean the detector. • any other condition that may 4. If storing Metal Detector for more affect its safe operation. than a week, remove batteries. Page 8 For technical questions, please call 1-888-866-5797. Item 67378...

  • Page 9: Troubleshooting

    2. Sweep the Search Coil at differing angles. (heavily oxidized metal, etc.) Unit does not Dead Batteries. Replace Batteries. function. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 67378 For technical questions, please call 1-888-866-5797. Page 9...

  • Page 10: Please Read The Following Carefully

    If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175498465 when ordering parts. Page 10 For technical questions, please call 1-888-866-5797. Item 67378...

  • Page 11: Assembly Diagram

    Diagram Item 67378 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents