About Your Projector; Remote Control - Panasonic PJLink PT-TW351RD Operating Instructions Manual

About your projector

Remote control

1 Power <v/b> button (v standby / b power on)
Turns the projector on or off.
2 <COMPUTER 1> button
Switches the Computer 1 or Component (YC
signal to project.
3 <COMPUTER 2> button
Switches the Computer 2 signal to project.
4 <VIDEO> button
Switches the Video signal or S-video signal to project.
5 <MEMORY VIEWER/USB DISPLAY/NETWORK>
button
Switches the Memory Viewer signal, the USB Display
signal or the Network signal to project.
6 <ENTER> button/asqw buttons
Used to navigate through the menu screen.
7 <MENU> button
Open or close the On-Screen Menu. (x page 41)
8 <ASPECT> button
Switches the aspect ratio of the image.
9 <FREEZE> button
Pauses the projected image and mute the audio
temporarily. (x page 37)
10 <AV MUTE> button
Used to turn off the audio and video temporarily.
(x page 37)
11 <D.ZOOM +/-> buttons
Zoom in and out the images. (x page 37)
Attention
f Do not drop the remote control.
f Avoid contact with liquids.
f Do not attempt to modify or disassemble the remote control.
f Please observe the following contents that are described on
the back of the remote control unit (see the right picture).
1. Do not use a new battery together with an old battery.
2. Do not use unspecified batteries.
3. Make sure the polarities (+ and -) are correct when inserting the batteries.
f In addition, please read the contents that are related to batteries in the "Read this first!".
Chapter 1 Preparation - About your projector
1
2
3
4
5
6
7
8
9
10
11
12
C /YP P )
B R B R
13
14
15
16
17
18
19
20
21
22
12 <VOLUME +/–> buttons
Adjusts the volume of the built-in speaker or audio
output. (x page 38)
13 Remote control signal emitter
<AUTO SETUP> button
14
Executes Input search, Auto PC adj. and Auto Keystone
correction at the same time.(x page 35)
15 <HDMI> button
Switches the HDMI signal to project.
16 <INFO.> button
Displays the [Info.] menu. (x page 70)
17 <KEYSTONE> button
Displays the [Keystone] menu. (x page 36)
18 <LAMP> button
Switches the settings of [Lamp control].
( Æ pages 37, 53)
19 <P-TIMER> button
Operate the P-timer function. (x page 37)
20 <IMAGE> button
Switches the image mode. (x pages 38, 49)
21 <DAYLIGHT VIEW> button
Used to correct the image when the projector is used in a
bright surroundings. (x pages 39, 51)
22 <MUTE> button
Used when temporarily turning off the audio.
(x page 38)
1.Do not use old battery with new one.
2.Do not use batteries other than the
type specified.
3.Be sure the batteries are inserted properly.
Made in China
ENGLISH - 17