ZERO-X ZX-G2 User Manual page 17

The ZX-G2 will move to the pre-selected waypoints
in sequence after shooting starts.
In Hyperlapse mode, only motion will be recorded
by the ZX-G2.
8. Shutter
This button will take photos or begin recording.
9. Album
Access your footage and photos.
10. Switch between front and rear camera
As the name suggests, easily transition between both
viewpoints.
11. Switch between Zoom or Focus Mode
'Z' stands for 'zoom'. In this mode, the slider on the
gimbal controls the zoom of the image. 'F' stands for
'focus'. In this mode, the slider on the ZX-G2 controls
the focus of the image.
12. Settings
Camera settings: In this setting you can set flashlights,
grids and image aspect ratios.
• Joystick sensitivity: You can adjust the sensitivity of
the joystick. The user can also reverse the up/ down
and left/ right control of the joystick.
13. Parameters of the ZX-G2 App
• The image resolution for panorama: There are
3 grades: low, medium and high. If necessary,
try reducing the image resolution setting in your
smartphone to improve the quality of your panorama
shot.
• Calibrating sensors: If the gimbal starts to drift
slowly, press this icon to calibrate the sensors.
Reboot the ZX-G2 after calibration.
• Horizontal adjustment: Calibrate the horizon of the
ZX-G2.
• Live Face tracking: Enable live face tracking while
using other streaming apps.
17