CONTENTS 1. Safety Precautions ........4 2. Important Battery Safety Information ..5 3. Product Features ........6 4. Charging The Gimbal .......7 5. Remote Control Battery Installation ..8 6. Power On/Off Gimbal ......11 7. Power On/Off Remote Control ....11 8. Remote Control Bluetooth Pairing ..11 9.
IN THE BOX 1. ZX-G0 Single Axis Gimbal x1 2. Micro USB Charging Cable x1 3. Screwdriver x1 4. Button Cell Battery x1 5. User Manual x1 6. Quick Start Guide x1 SAFETY PRECAUTIONS Please read and understand these safety precautions before using the gimbal.
IMPORTANT BATTERY SAFETY INFORMATION • Do not use any third-party or unknown accessories or batteries. • Do not disassemble the battery. • Do not short circuit the battery. A short circuit may occur when the battery is in contact with other metal objects. •...
PRODUCT FEATURES 1. Gimbal status indicator 2. Gimbal power button 3. Pole extender 4. Bluetooth remote control indicator 5. Tripod grip 6. Phone clip 7. Micro USB charging port 8. Positioning bead 9. Rotation lock 10. Capture/record button...
CHARGING THE GIMBAL Use the supplied Micro USB cable and plug it into the Micro USB charging port to charge the gimbal. Once charging is complete, the light on the gimbal status indicator will change from red to green. Micro USB Charging Port...
REMOTE CONTROL BATTERY INSTALLATION Please refer to the illustrations with regard to the following instructions. 1. Extend the pole extender. 2. Remove the remote control by pushing it up.
Page 9
3. Unscrew the battery compartment and slide it out in the direction of the arrow indicator. 4. Insert a button battery CR1620 into the battery compartment.
Page 10
5. Replace the battery compartment cover and fixing screw. 6. Re-install the remote control onto the gimbal stem. 7. Retract the pole extender.
Press for 3 seconds 2. Turn on the Bluetooth settings in your smartphone and follow the prompts to connect to the ZX-G0. 3. The gimbal is now paired to your smartphone. GIMBAL SET-UP 1. Unfold the gimbal and tighten the rotation lock.
• If the gimbal is not well-balanced, it may overheat or use excessive power when turned on. 10. GIMBAL MODE The ZX-G0 can be used with or without gimbal mode. To turn on gimbal mode, rotate the gimbal clockwise so that it moves freely and is not latched to the positioning bead.
11. PORTRAIT AND LANDSCAPE MODES To switch between portrait and landscape mode, press the gimbal power button (2) and the gimbal will automatically switch to the preferred mode from the previous position. 90° 12. SELFIE AND TRIPOD FUNCTIONS The gimbal can be used as a selfie stick or smartphone tripod.
position to avoid any tilting. 13. SPECIFICATIONS Net weight: 230g Maximum weight capacity: 300g Battery capacity: Li-ion 400mAh Charging port: Micro USB Charging voltage: 5V Operating current: 50mA to 900mA Operating duration: Up to 4 hours Bluetooth remote control range: 10m Remote control battery type: CR1620 Folded dimensions: 190mm x 70mm x 40mm Extended length: 600mm...
15. WARRANTY WARRANTY TERMS AND CONDITIONS Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a...
Page 16
Zero-X and its subsidiaries and affiliates, relating to or arising out of your breach of any provision of these terms, your misuse of Zero-X or its services, or your unauthorized modification or alteration of products or software.
Page 17
Zero-X (including third party content), that any defects in the Zero-X will be corrected or that the Zero-X products or Zero-X services will be compatible with any other specific hardware or service.
Page 18
Zero-X equipment and services provided will detect or avert such incidents or their consequences. Zero-X does not undertake any risk that you or property, or the person or property of others, may be subject to injury or loss if such an event occurs.
Page 19
Other than as permitted by law, Zero-X does not exclude, limit or suspend other rights you have, including those that may arise from the nonconformity of a sales contract.
Page 20
Should the claim for damages be based on wilful or grossly negligent breach of contractual duty or obligation on the part of Zero-X, the preclusion and limitation of liability mentioned in the preceding sentences will not apply.