ZERO-X ZX-G2 User Manual page 16

BEGINNGERS TIP: A green, rectangle frame will appear in the
Zero-X Gimbal App once a face or object has been identified.
If the object or face is not recognised the rectangle will
become red, and you will need to start the tracking recognition
process again.
To stop tracking, press the cross icon on the top right-
hand corner of the rectangle.
6. Gesture Control Mode
7. Shooting Modes / Functions
•
•
•
•
•
•
16
This mode allows you to make certain hand gestures
that will help control functions of the camera.
Recognised gestures:
• Scissor Gesture: 3 second delay before photo is taken.
• Palm Gesture: The camera will switch between
Slide to select different shooting modes:
Panorama: There are three sub-modes: 180°, 320° and
3x3 modes. In 180° mode 3 photos are taken and fused
together. In 320° mode, 8 photos are taken and fused
together. In 3x3 mode, 9 photos are taken and fused
together.
Photo: Takes a single photo or is used as a timer.
Video: Shoots a video.
Beauty Mode: Allows for softer lights and filters.
Slow-Motion: Shoots 8 times slower than usual.
Timelapse: There are 2 sub-modes – static timelapse
and waypoint lapse.
When in static Timelapse Mode, select the interval
and time length on the top of the screen and press
the record icon. In this mode, you can also use the
tracking feature, while shooting timelapse videos
simultaneously.
When in Timelapse Mode, besides the interval and
time length, the user can also set up to 5 waypoints
by using the joystick.
photo and video mode.