When You Want A Massage Of A Particular - Panasonic EP-MA100 Operating Instructions Manual

When you want a massage of a particular bo
⁃
The power is turned OFF automatically if massage is not started and no operation is performed for about 3 minutes.
⁃
In "Select favorite area", it is possible to select the desired part and select the desired massaging operation. (See EN25 for details)
⁃
Massage is performed for about 19 minutes after starting. If only a small number of body parts are selected, the
massage is repeated on respective body parts.
⁃
Up to three patterns of setting details, such as body parts selected from personal preference, edited massage action and the like.
1
Turn on the
power .
4
Select one of
"Setting 1 to 3" .
⁃
Screen displays for
selected body parts and
body parts can be stored
in memory.
7
press "OK" .
⁃
Sensing motion starts.
(EN20 to EN21)
⁃
Scanning of shoulder roller
position is not made if body
parts are selected where
only air operates.
(See EN26 for air massage)
Details stored in the memory are used to start the operation
for subsequent sessions, with the controller displaying the
previously set "Setting 1 to 3", "Screen for the desired location"
and "Location". There is no need to select body parts.
When body parts or settings for ongoing massage are changed,
details stored in the memory are overwritten.
(Updating of memory does not occur if a power outage occurs)
When
EN24
2
Select the user .
(EN22)
(The registered user is just an example)
5
Select the screen
for body parts .
⁃
Select the screen for
the desired body part to
massage.
8
After scanning ends, massage starts .
(EN20 to EN21)
⁃
The selected body parts, from neck down to hips, are massaged
in sequence.
• When body part combination only consists of the upper arm,
arm, pelvis, legs and sole, massage actions that involve air
operations only is performed.
• When the body part combination consists of the upper arm, arm,
pelvis, legs or sole with any other body parts, massage actions
are performed on such other body parts as well as the upper
arms, arms, pelvis, legs or sole at the same time.
⁃
Storing of details of settings in the memory starts.
was selected, "Settings 1 to 3" is not displayed.
3
Select "Select
favorite area" .
User display
6
Select a body
part .
⁃
Select the desired body
part for massaging.
⁃
Multiple selection is
possible.
⁃
Repeat Steps 5 and 6 to
select body parts.
This eliminates the
tediousness of having to
select the desired body
part or the adjustments of
massaging every time!