About User Selection / User Registration - Panasonic EP-MA100 Operating Instructions Manual

About user selection / user registration

When you would like to store the settings made to suit your liking in memory
⁃
Perform user registration before using the lounge for massaging.
If user registration is made, the adjustments and settings to massaging are automatically
stored and updated in memory.
There is no need to carry out any special operation for storing the settings.
• The contents of "Skip" and "Stretch" are not stored.
• Since the shoulder position differs depending on how the user sits, the "Scanning
of shoulder roller position" is carried out every time, even if user registration has
been made.
⁃
Even when terminated in the middle of massaging, the settings made until then are
stored in memory.
• However, the settings will not be stored in memory if there is a power failure, or the
power supply switch at the back panel of the unit body is switched "OFF", or if the
power supply cord is pulled out from its power socket.
⁃
Select "Guest" if you do not wish to register and wish to start massaging immediately.
Press the button for user
registration
⁃
Once a user is registered, the user only needs to select the registered user for
subsequent sessions and the massage lounger performs massage according to
details recorded in memory from the previous session.
⁃
It is possible to change the icon of a registered user, and to delete the registration itself.
Press "Edit user"
Select the user to be
edited
EN22
User selection / registration method
Select the icon and color
to be registered and press
"Register"
Edit user (Changing and deleting user buttons)
Changing
Press "Change icon"
Deleting
Press "Delete registration"
To
abort
editing
Press "Back"
Once registration
has been completed,
the registered icon is
displayed.
Select a new icon, then press "Register".
Press "Delete"
Register as a user and store
the massage adjustments
and settings made in
memory.
Start massaging immediately
The settings made to suit
your desire are stored in
memory, thereby avoiding the
tediousness of having to make
the same settings every time!