Scanning Of Shoulder Roller Position - Panasonic EP-MA100 Operating Instructions Manual

Scanning of shoulder roller position

⁃
Scanning of shoulder roller position is the operation of estimating the shoulder position in order to ensure that
massaging is done matching with the body shape.
(Height range of scanning of shoulder roller position is about 140 cm to 185 cm.)
Scanning of shoulder roller position flow
Select a course
Otherwise, select a body
part and press "OK" .
⁃
No scanning is made if the air course,
or operation with only air is selected.
(See EN26 for regarding air massage.)
Ⱚ Shoulder tapping position is not aligned
Press"▲"or"▼"duringthetappingaction(about12
seconds) to adjust the shoulder height position and
press "OK".
When "OK" is pressed, the scanning of shoulder roller
position is completed and the massaging is started.
EN20
The unit body moves
automatically and becomes
reclined to an angle suitable
for scanning .
⁃
The movement is not made when the unit body
is deeply reclined.
Sit back and lean gently back so
that your head touches the pillow .
⁃
For adjustment of the position of the pillow.
(EN15)
Raised
approx. 60°
Moves approx.
1.2 cm up or
down for each
press.
Reclined
approx. 20°
Too high
Correct position of
the massage roller
(The point where the
tapping action should
be felt.)
Too low