Table of Contents
Advertisement
ST-EZ4 QUICK START GUIDE
prompts to install the plug-in.
You may have to close the web browser to finish the installation of the plug-in.
Live View
The live view interface appears by default when you log into the device.
1
The live view interface may differ according to different models.
Interface Introduction
No.
Name
1
Channel List
Live View
2
Window
3
Play Control Bar
4
PTZ Control
The PTZ control is supported by certain series NVR.
Start Live View
Steps:
1.
In the live view window, select a playing window by clicking the mouse.
2.
Double click a camera from the device list to start the live view.
3.
You can click the
Refer to the following table for the description of buttons on the live view window:
Description
Displays the list of channels and the playing and recording status of each
channel.
Displays the image of channel, and multi-window division is supported.
Play control operations are supported.
Pan, tilt, zoom operations are supported, as well as preset editing and
calling.
PTZ function can only be realized if the connected camera supports PTZ control.
button on the toolbar to start the live view of all cameras on the device list.
25
2
3
4
Advertisement
Table of Contents
