Table of Contents
Advertisement
10
Maintenance
<Daily maintenance>
Cleaning of air filter
1
Turn off the air conditioner.
Set the circuit breaker to OFF.
2
Open the air intake grille.
1) Loosen the fixing screw.
2) Slide the fixing bracket toward the inside.
41-EN
3) Holding the air intake grille, slide the hook in
the direction of the arrow and slowly open the
grille.
Hook
3
Take out the air filter.
• Push the extrusion of the air filter away from the
grille and remove.
Fall-preventive
strap
– 21 –
4
Cleaning with water or vacuum cleaner.
• If dirt is heavy, clean the air filter using tepid
water with a neutral detergent or just water.
• After cleaning with water, dry the air filter
sufficiently in a shaded place.
5
Mount the air filter.
6
Close the air intake grille.
• Check that the fall-preventive strap of the air
intake grille is attached to the panel.
• In inverse process of 1, firmly attach the hook,
fixing bracket and fixing screw.
7
Set the circuit breaker to ON.
CAUTION
CAUTION
• Do not start the air conditioner while leaving air filter
removed.
Hook
42-EN
Advertisement
Table of Contents
