Maintenance - Toshiba RAV-GE1301BP Series Installation Manual

Table of Contents

Advertisement

Available languages

Available languages

12

Maintenance

<Daily maintenance>
Cleaning of air filter
If
is displayed on the remote controller, maintain the air
filter.
1
Push the
button to stop the operation,
then turn off the circuit breaker.
After the cooling or dry operation, the fan keeps
running for self-cleaning. Push the
twice to stop the operation.
1. Take out the air filter.
Slide and remove the filter as shown in the following figure:
WARNING
When the first filter comes out without connected to the other one, insert it once more to connect the two filters
together and pull out them as connected. Do not insert hands to take out the second filter. You may injure
yourself.
2. Cleaning with water or vacuum cleaner.
If dirt is heavy, clean the air filter by tepid water with neutral detergent or water.
After cleaning with water, dry the air filter sufficiently in a shade place.
3. Mount the air filter.
* Insert the filters into the direction which the arrows, carved on the filters, show. (2 filters are identical)
2
Turn on the circuit breaker, then push the
operation.
3
After cleaning, push
.
display disappears.
CAUTION
Do not start the air conditioner while leaving air filter removed.
Push the filter reset button. (
indication will be turn off.)
43-EN
1116950140_01_EN.indd 22
1116950140_01_EN.indd 22
1,2
button
3
button on the remote controller to start the
Periodic Maintenance
For environmental conservation, it is strongly recommended that the indoor and outdoor units of the air conditioner
in use be cleaned and maintained regularly to ensure efficient operation of the air conditioner.
When the air conditioner is operated for a long time, periodic maintenance (once a year) is recommended.
Furthermore, regularly check the outdoor unit for rust and scratches, and remove them or apply rustproof
treatment, if necessary.
As a general rule, when an indoor unit is operated for 8 hours or more daily, clean the indoor unit and outdoor unit
at least once every 3 months. Ask a professional for this cleaning / maintenance work.
Such maintenance can extend the life of the product though it involves the owner's expense.
Failure to clean the indoor and outdoor units regularly will result in poor performance, freezing, water leakage, and
even compressor failure.
Inspection before maintenance
Following inspection must be carried out by a qualified installer or qualified service person.
P
r a
s t
Access from inspection opening and remove the access panel. Examine the heat exchanger if
Heat exchanger
there is any clogging or damages.
Fan motor
Access from inspection opening and check if any abnormal noise can be heard.
Access from inspection opening and remove the access panel. Examine the fan if there are
Fan
any waggles, damages or adhesive dust.
Filter
Go to installed location and check if there are any stains or breaks on the filter.
Access from inspection opening and remove the access panel. Check if there is any clogging
Drain pan
or drain water is polluted.
Maintenance List
Part
Unit
Heat exchanger
Indoor / outdoor
Fan motor
Indoor / outdoor
F
t l i
r e
n I
d
o
r o
F
a
n
n I
d
o
r o
Air intake / discharge
Indoor / outdoor
grilles
D
a r
n i
p
a
n
n I
d
o
r o
Ornamental panel,
Indoor
louvers
E
x
e t
i r
r o
O
u
d t
o
r o
– 22 –
n I
s
p
e
t c
o i
n
m
e
h t
o
d
Check (visual / auditory)
Maintenance
Wash the heat exchanger when it is
Dust / dirt clogging, scratches
clogged.
Take appropriate measures when
Sound
abnormal sound is generated.
Wash the filter with water when it is
D
u
s
/ t
i d
, t r
b
e r
a
k
a
g
e
contaminated.
Replace it when it is damaged.
Replace the fan when vibration or
Vibration, balance
balance is terrible.
Dust / dirt, appearance
Brush or wash the fan when it is
contaminated.
Fix or replace them when they are
Dust / dirt, scratches
deformed or damaged.
Dust / dirt clogging, drain
Clean the drain pan and check the
contamination
downward slope for smooth drainage.
Wash them when they are contaminated
Dust / dirt, scratches
or apply repair coating.
Rust, peeling of insulator
Apply repair coating.
Peeling / lift of coat
EN
ID
TH
44-EN
11/13/18 2:18 PM
11/13/18 2:18 PM

Advertisement

Table of Contents
loading

Table of Contents