Download Print this page

DeWalt DW0802 Instructions Manual page 8

Diy tile laser

Advertisement

Available languages

Available languages

• Turn the tool off when it is not in use. Leaving
E
the tool on increases the risk of staring into the laser
beam.
• Do not modify the tool in any way. Modifying
the tool may result in hazardous laser radiation
exposure.
• Do not operate the tool around children or allow
children to operate the tool. Serious eye injury
may result.
• Do not remove or deface warning labels. If labels
are removed, the user or others may inadvertently
expose themselves to radiation.
• Position the tool securely on a level surface. If
the tool falls, damage to the tool or serious injury
could result.
Personal Safety
• Stay alert, watch what you are doing, and use
common sense when operating the tool. Do not use
the tool when you are tired or under the influence
of drugs, alcohol, or medication. A moment of
inattention while operating the tool may result in
serious personal injury.
• Use personal protective equipment. Always wear
eye protection. Depending on the work conditions,
wearing protective equipment such as a dust
mask, non-skid safety shoes, hard hat, and hearing
protection will reduce personal injury.
Tool Use and Care
• Do not use the tool if the Power button
turn the tool off. Any tool that cannot be controlled
with the power button is dangerous and must be
repaired.
• Follow instructions in the Maintenance section of
this manual. Use of unauthorized parts or failure to
follow Maintenance instructions may create a risk of
electric shock or injury.
8
Battery Safety
WARNING:
Batteries can explode, or leak, and can
cause injury or fire. To reduce this risk:
• Carefully follow all instructions and warnings on the
battery label and package.
• Always insert batteries correctly with regard to
polarity (+ and –), as marked on the battery and the
equipment.
• Do not short battery terminals.
• Do not charge disposable batteries.
• Do not mix old and new batteries. Replace all
batteries at the same time with new batteries of the
same brand and type.
• Remove dead batteries immediately and dispose of
per local codes.
• Do not dispose of batteries in fire.
• Keep batteries out of reach of children.
• Remove batteries when the device is not in use.
Installing New AA Batteries
This tool is powered by 3 AA batteries. Use of any
other batteries may create a risk of fire.
Lift up the handle on the battery compartment
1.
cover (Figure
Pull the black ribbon to loosen the batteries so
2.
you can easily remove them from the battery
does not
compartment (Figure
Over the black ribbon, insert three new, high-
3.
quality, name brand AA batteries, making sure to
position the - and + ends of each battery as noted
inside the battery compartment (Figure
Push the battery compartment cover down until it
4.
snaps in place (Figure
).
B 1
).
B 2
).
B 4
).
B 3

Advertisement

loading