Table of Contents
Advertisement
Display
"PC FAIL OR BUSY"
"PLEASE WAIT"
"POLLING ERROR"
"REDIAL TIME OUT"
"REMOVE DOCUMENT"
"RX MEMORY FULL"
"SCANNER POSITION ERROR"
"SELF CALIBRATION"
"TRANSMIT ERROR"
"TONER CARTRIDGE NOT
INSTALLED"
"TRAY #2 LEFT COVER
OPEN"
"WASTE TONER FULL"
b
"CHANGE SUPPLIES"
"WASTE TONER NOT
INSTALLED"
"WASTE TONER REPLACE"
b
"CHANGE SUPPLIES"
Cause & Solution
L The cable or the computer power cord is not connected correctly. Check the
connections.
L The software is not running on the computer. Restart the software and try
again.
L The unit is warming up. Wait for a while.
L The other party's fax machine does not offer the polling function. Check with
the other party.
L The other party's fax machine is busy or has run out of recording paper. Try
again.
L The document is jammed. Remove the jammed document.
L Attempted to send or copy a document longer than 600 mm using the
automatic document feeder. Press {Stop} to remove the document. Divide
the document into two or more sheets and try again.
L The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper or remove the jammed paper.
L If feature #442 is set to "ALWAYS",
– check the connection between the computer and the unit.
– check the computer is turned ON.
L There is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
L The unit is changing the colour calibration. Wait for a while.
L A transmission error occurred. Try again.
L The toner cartridge is not installed. Install it.
L The left cover of the optional input tray is open. Close it.
L The waste toner cartridge life is near its end. Replace the waste toner
cartridge as soon as possible.
L The waste toner cartridge is not installed. Install it.
L The waste toner cartridge life is finished. Replace the waste toner cartridge
immediately.
Detailed operating instructions are on the CD-ROM.
3. Help
21
Advertisement
Table of Contents
