DeWalt DW080LRS Manual page 23

Select Rotary Control to change the setting for the rotary laser.
7.
• When is selected, choose the rotation speed (150, 300,
600, or 1200).
• Select and choose the rotation angle (0, 15, 45, 90, or
15˚/45˚/90˚
360) and the rotation direction (
• Select and choose the Slope Setting, Axis Setting (X or
Y), Slope Configuration (% or degree), # degree or %.
Use your cell phone to control the laser.
8.
When you are ready, turn the laser off from the Diagnostic screen.
9.
Controlling the Laser from up to 1100' Away
You can use Bluetooth capability to pair the Detector DW0743DR (Red
®
laser) or DW0743DG (Green laser) with the DEWALT
application on your cell phone, and then use your cell phone to control
the laser (Figure ).
J 3
From either or
1.
Tool Connect™ application to your cell phone.
On the laser keypad, press
2.
On the laser keypad, see if the blue LED next to
3.
blue LED is already lit, the laser is probably already paired with
another smart device. You will need to unpair the laser from
the other device before you can pair it to the D
Connect™ application.
Pair the D WALT Tool Connect™ application to the laser via a
4. ®
E
Bluetooth connection.
®
or ).
Tool Connect™
®
, download the D WALT
E
to turn the laser on.
is lit. If the
WALT Tool
®
E
First Time Pairing
1. On the D WALT Tool
®
E
Connect™ application, click
2. In the list of D WALT product
E
types, select Rotary Laser.
3. Enter a Name for the rotary
laser (e.g., DW080LRS/LGS).
4. On the laser keypad, press
and hold for 3-5 sec until the
Bluetooth connection turns on
®
(blue LED starts blinking).
5. When the application lists
the laser's model number as IN
RANGE, select it.
NOTE:
If the Bluetooth connection does not turn on, replace the D
®
®
20V battery.
On the laser keypad, press
5.
connection to the detector.
Tool Connect™ application, press Add a detector.
On the DEWALT
6. ®
Enter a Name for the detector and press Connect.
7.
Turn on the detector and then press
8.
connection.
The D WALT Tool Connect™ application will display information
9. ®
E
about the laser on the Diagnostics screen:
• If the current settings are one of the "favorite settings" you have
saved for the laser, it will display the name of that setting (e.g.,
Main St - Site 1).
• If the laser is dropped, disturbed, etc., it will send messages to
the Tool Connect™ application to inform you.
• If the Tracking feature is on, the application will know where the
laser is and will let you know if the laser has been taken and is
now out-of-range. (The Coin Cell battery enables the Tracking
feature.)
Paired Before
On the laser keypad,
.
press to turn on the
Bluetooth connection. The
®
blue LED will illuminate.
WALT
E
(Figure ) to turn on the
A 6
to turn on the Bluetooth
E
®
23