Language Settings; Date And Time; Recording Your Greeting Message; Other Settings - Panasonic KX-TGF850 Operating Instructions Manual

Language settings

Display language
Handset / Base unit
1
MMENUN#110
2
MbN: Select the desired setting. a MSAVEN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Note:
R The language selected will also be used for the
low battery alert announcement (page 16).
Voice announcement language
You can select the language used for the following
features.
– Answering system guidance
– Talking Caller ID
– Answer by voice command announcement
Handset / Base unit
1
MMENUN#112
2
MbN: Select the desired setting. a MSAVEN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN

Date and time

You can configure this setting using either the
base unit or one of the handsets.
Handset / Base unit
1
MMENUN#101
2
Enter the current month, date, and year by
selecting 2 digits for each.
Example: July 12, 2020
07 12 20
3
MOKN
4
Enter the current hour and minute (12-hour
clock format) by selecting 2 digits for each.
Example: 9:30
09 30
For assistance, please visit http://shop.panasonic.com/support
5
Proceed with the operation for your unit.
Handset: *: Select "AM" or "PM".
Base unit: MAM/PMN: Select "AM" or "PM".
6
MSAVEN
7
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Note:
R When English is selected as the display
language, 12-hour clock format is used. When
Spanish is selected, 24-hour clock format is
used.
Recording your greeting
message
You can record your own greeting message
instead of using a pre-recorded greeting message.
See page 48 for details.
You can configure this setting using either the
base unit or one of the handsets.
Handset / Base unit
1
MMENUN#302
2
MbN: "Yes" a MSELECTN
3
Record a greeting message. a MSTOPN
4
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN

Other settings

Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is "Tone".
"Tone": For tone dial service.
"Pulse": For rotary/pulse dial service.
You can configure this setting using either the
base unit or one of the handsets.
Handset / Base unit
1
MMENUN#120
2
MbN: Select the desired setting. a MSAVEN
Getting Started
15