How To Use The Microwave - Russell Hobbs RHMD714 User Manual

HOW TO USE THE MICROWAVE

Turn on the power
Connect the main plug into a suitable 13amp mains socket.
Note: Make sure the voltage is the same as on the rating label located on the
back of the microwave (do not use extension cables or mains socket
adaptors.)
The LED light in the microwave display window will flash 3 times and then
enter standby mode by showing '1:00'.
Setting the clock (24 hour)
For example, if you want to set the time to 08:30 (am:)
1. Press the 'Defrost/Clock' button for 3 seconds. The display will show
'1:00', and the clock symbol will be displayed.
2. Turn the 'Time/Weight' dial clockwise until the display shows '8:'.
Press the 'Clock' button to confirm.
3. The display will show '8:00' and the clock symbol will continue to
flash.
4. Set the minutes by turning the 'Time/Weight' dial clockwise until the
display shows '08:30'. Press the 'Clock' button to confirm.
The clock is now set, the colon will continue to flash and the 'Clock'
symbol will stay lit.
Note: If you do not turn the dial and press the 'Clock' button to confirm
the time fairly quickly, the microwave will default to the time currently set
on the screen.
20