Panasonic Viera TX-PF50G30 Operating Instructions Manual page 35

Menu Item
Eco Navigation
Recording Setup
VIERA Link
HDMI Content Type
AV1 out
Power on Link
Power off Link
Standby Power Save
Intelligent Auto
Standby
Download
Child Lock
Favourites Edit
Channel List
Auto Setup
Manual Tuning
Update Channel List
Favourite Network
New Channel
Message
Service Replacement
Signal Condition
Attenuator
Add TV Signal
Adjustments / Configurations (alternatives)
Automatically sets the TV to the most suitable energy-saving mode
•
If you press the OK button, the following items are set as below :
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save], [Power Save]
[Intelligent Auto Standby]
[Auto Standby] [2 hours]
Formats the connected USB HDD and sets the condition (p. 55)
Sets to use VIERA Link functions [Off] / [On] (p. 85)
Adjusts the picture settings according to the content type signal from the connected
equipment via HDMI cable [Off] / [Auto]
•
This function is available if the connected equipment supports HDMI Content Type.
•
The content type information will be displayed for several seconds when this function
works.
Chooses the signal to be transmitted from the TV to Q-Link [TV] / [AV2] / [Monitor]
[Monitor] : Image displayed on screen
•
Component and HDMI signals cannot be output.
Sets to use Power on Link function [Off] / [On] (p. 84, 85)
Sets to use Power off Link function [Off] / [On] (p. 84, 85)
Controls the power consumption in Standby mode of the connected equipment to
reduce the consumption [Off] / [On] (p. 86)
•
This function is available when [VIERA Link] is set to [On] and [Power off Link] is set
to [On].
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
[Off] / [On (With reminder)] / [On (No reminder)] (p. 86)
•
This function is available when [VIERA Link] is set to [On].
Downloads channel, language, country / region settings to a Q-Link or VIERA Link
compatible equipment connected to the TV
•
DVB-C channel settings cannot be downloaded.
Locks a channel / AV input to prevent access to it (p. 47)
Creates list of favourite DVB-C channels (p. 40)
Skips the unwanted DVB-C channels or edits DVB-C channels (p. 41)
Automatically sets the DVB-C channels supplied (p. 38)
Sets the DVB-C channels manually (p. 42)
Updates DVB-C Channel List while keeping your settings (p. 42)
Selects your favourite network for each broadcasters (only available in some countries)
Selects whether to give a notification message when a new DVB-C channel is found
[Off] / [On] (p. 42)
Set to [On] to enable a message to switch to the available service (only available in
some countries) [Off] / [On]
Checks the DVB-C signal condition (p. 42)
Automatically reduces the DVB-C signal to avoid the interference [Off] / [On] (p. 42)
Adds the TV mode
•
This function is available if you skip any modes to tune in [Auto Setup] for first using
the TV.
•
To operate, refer to the "Auto Setup" operations for first using the TV (p. 13, 14).
[On (No reminder)]
[On]
35