Download Print this page

Preventative Maintenance - Welbilt Cleveland T1 Installation Operation & Maintenance

Gas braising pan

Advertisement

PREVENTATIVE MAINTENANCE

FOR MAINTENANCE AND REPAIRS CONTACT YOUR AUTHORIZED
MANITOWOC SERVICE AGENCY AND HAVE A QUALIFIED
SERVICE TECHNICIAN MAINTAIN YOUR EQUIPMENT.
Cleveland Range equipment requires little preventative maintenance. We do however provide the following
guidelines for inspection and maintenance to keep your unit functioning at 100%.
DAILY PRE-STARTUP
INSPECTION
1. Cover tilts up and down freely and is held in place
when fully open.
2. Draw-Off Valve (if equipped) is installed and handle is
in place.
3. Tilt hand wheel is tight (if equipped).
4. Tilt switch (if equipped) (5) is not broken and is
functioning properly.
5. Pan tilts up and down correctly.
6. Temperature dial (3) is in place and functioning
properly.
7. Red Light (2) comes on when unit is turned on.
8. Orange Light (4) is on when unit is heating.
9. Orange Light (4) is off when unit is tilted.
10. If unit is equipped with casters ensure they are
functional and in a locked position.
SIX MONTH SERVICE
INSPECTION
1. Perform daily startup inspection.
2. There are no hydraulic oil leaks.
3. Adequate exhaust and makeup air is supplied to
working area.
4. Console cover is in place and securely fastened.
5. All panels are in place and securely fastened.
6 If unit is equipped with casters check that caster
locks are functional and caster wheels and
bearings are not damaged.
YEARLY SERVICE INSPECTION
1. Perform six month service inspection.
2. Inspect safety thermostat for proper connections.
3. Clean blower.
4. Perform free air calculation (see FREE AIR
CACULATION).
5. Inspect burner gasket (see BURNER GASKET
INSPECTION).
WARNING:
If for any reason this unit is not
!
functioning correctly DO NOT
OPERATE. Contact your
authorized service agent.
HI
LO
4
1
2
3
8.
5

Advertisement

loading

This manual is also suitable for:

Cleveland sgl-30-t1Cleveland sgl-40-t1