Advertisement
6. Move the folding block unit forward until it touches the workpiece, and pull it into place.
7. Fold the workpiece until the piece to be formed has roughly reached the pin (see "P" on fig-
ure).
8. Now set the spring pin (25) of the spring-forming die "B" (30) into the holes 4 and 5.
9. Finish folding by completely lagging the dies.
Figure 2
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61856
Figure 3
04
Page 6
2021-1
Advertisement
