ITC TPR08-72 Install Instructions

PARTS / TOOLS NEEDED:

Closet Light Channel

SAFETY INSTRUCTIONS

• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• Do not install any luminaire assembly closer than 6" from any combustible materials.
• Positive (+) outputs require a fuse if the attached wire leads are not rated to handle the max current.

INSTALLATION CONSIDERATIONS

•Do not bend lighting more than necessary. It should only be bent to a 1" radius. Bending to a tight 90 ◦ angle could cause damage
to the circuit.
•Only bend the LED ribbon in one natural direction, do not try to bend in an unnatural direction such as twisting.
•Cannot be used with ITC's FlexConnex™ product.
•The channel is designed for interior installation only and is not rated for UV exposure.
1.
Determine the installation location and staple or screw channel in
place. If screwing the channel in place, pre-drill holes to prevent
the channel from cracking or warping.
3.
Follow the wiring diagram to wire the light to your system.
Phone: 616-396-1355 • www.itc-us.com • sales@itc-us.com • DOC#: 710-00184 • Rev A: 01.26.21
Closet Light Install Instructions
(Part #: TPR08-72 & TPR12KK-LLLWL-8)
TPR Tape Light Power Drill or Staple Gun
For warranty information please visit www.itc-us.com
3030 Corporate Grove Dr • Hudsonville • MI • 49426
#4 Mounting Screws
(optional)
2.
Press the tape light into the channel making sure not to pinch or
sharply bend the light. If additional securement is needed, the
paper backing can be removed from the light and it can be
taped into the channel.
Tape Light
Butt Splice Connectors
(not provided)
Black (-)
Red (+)
Black (-)
Fuse
To 12V DC
Power