Preparation For Use; Unpacking And Setup; Power Source - Scott SM51TR Owner's Manual

UNPACKING AND SET-UP
• Carefully remove the unit from the carton and remove all packing material from the unit.
• Remove any labels or stickers which may be on the front or top of the set, but do not
remove any labels from the back or bottom.
• We suggest that you retain the original carton and packing materials in case it ever becomes
necessary to return your unit for service. This is the only sure way to protect the unit from
damage in transit.
• If you do dispose of the carton and packing materials, please do so properly.

POWER SOURCE

This system is designed to operate on 120V 60Hz AC house current. Connecting this system
to any other power supply could result in damage to the unit which is not covered by your
warranty.You will note that this system is equipped with a polarized AC power plug having
one blade wider than the other. This is a safety feature. If this plug does not fit into your
existing AC outlet, do not try to defeat this safety feature by filing the wide blade to make it
fit into your outlet. If this plug will not fit into your outlet, you probably have an out-dated
non-polarized AC outlet. You should have your outlet changed by a qualified licensed
electrician.
SM51TR.p65

PREPARATION FOR USE

3
3
2001/7/3, PM 02:21