Normal Cd Playback; Disc Status - Scott SM51TR Owner's Manual

Home audio system with 5 cd changer and turntable
Table of Contents

Advertisement

PLAYING COMPACT DISC
LOADING A DISC INTO THE CD TRAY
1. Press the POWER button to turn the system 'On'.
2. Press the CD button on the front panel or remote
control.
3. The disc indicator corresponding to the currently
selected disc will be surrounded by an illuminating
semi-circle at all times.
4. Press the OPEN / CLOSE button to open the CD
tray.
5. Insert only one disc into one CD tray.
6. Press the DISC SKIP or CD button to rotate and
you may load maximum 5 discs as desired.
7. Press the OPEN / CLOSE button again to close
the CD tray.

DISC STATUS

To check the disc status, first press the PLAY / PAUSE
button to start playback, then press the DISC SKIP
button once for each disc.
1. When the particular disc tray is being checked by
the playback sensor, the total tracks number and
total time will be read and displayed.
2. If there is no disc in the selected tray, the disc
number indicator light goes out.
SM51TR.p65
1
2
5
4
3
18

NORMAL CD PLAYBACK

1. Press the PLAY / PAUSE button to start playback.
Press repeatly to start or pause the CD playback.
2. The playback sensor will search the disc trays.
3. If the first disc tray is empty, the disc number
indicator for that disc will disappear. Then the
playback sensor will detect the next disc and the
semi-circle indicator for the next disc will illuminate.
4. When the first disc is found, it will immediately begin
to read and display the total tracks number and
total time of this disc. Press the PLAY / PAUSE
button to begin playback from track 1.
5. Press the TUNING DOWN / PREVIOUS or
TUNING UP / NEXT button briefly to select the
desired track.
6. Press and hold the TUNING UP / NEXT button to
move forward.
7. Press and hold the TUNING DOWN / PREVIOUS
button to move backward.
8. Press the STOP / MEMO-DOWN button to stop CD
playback.
9. You can pause CD playback by pressing PLAY /
PAUSE button. Press the same key again to
resume playback.
10. To select another disc, simply press the DISC SKIP
or CD button repeatedly until the desired disc is
selected.
18
2001/7/3, PM 02:24
1
2
5
4
3

Advertisement

Table of Contents
loading

Table of Contents